- Stock: In Stock
- Model: KID-K7CO
- EAN: 0047871313396
- Weight: 160g
- Dimensions: 119mm x 72mm x 40mm
Available Options
Carbon monoxide detector model K7CO equipped with a Kidde electrochemical sensor, guaranteeing 10 years of operation. Battery power supply allows the detector to be mounted in an optimal place in the room and provides protection also in the event of a power failure in the network.
Exceeding the permissible CO level is signaled optically (red LED) and acoustically (loud, pulsating sound alarm with a strength of 85dB). The device's memory stores information about the detection of CO concentration exceeding the level of 100 PPM. Thanks to this, the user can make sure that there is no emission of carbon monoxide during his absence in the room. The device has a test / reset button that allows you to check the operation of the device and reset the alarm signal.
The efficiency control system monitors on an ongoing basis, among others: the sensor, internal circuits and the state of the battery. In the event of a malfunction or low battery level, the yellow LED flashes and an audible warning sounds. In addition, the detector is equipped with a function that allows you to quickly check the correct response of the device to the CO test gas.
Thanks to the special shock-resistant design, the detector has been approved for use not only in houses and apartments, but also in caravans, motorhomes and boats. After 10 years from the activation of the power supply, the detector will remind you to replace the device.
K7CO is marked with the construction mark B confirming compliance with the requirements of the Polish standard PN-EN 50291-1: 2018+AC:2021 for home carbon monoxide detectors. The research was carried out by the Scientific and Research Center for Fire Protection - National Research Institute (CNBOP-PIB). In addition, it has a BSI certificate confirming compliance with the requirements of BS EN 50291-1:2018 issued by the British Standards Institution.
In addition, the K7CO detector is certified to meet the requirements of BS EN 50291-2:2019 (PN-EN 50291-2: 2020) and allows the device to be used in camping vehicles and boats. Compliance with the above-mentioned standard has been confirmed by an independent research unit of the British Standards Institution.
ADVANTAGES
- Electrochemical technology - one of the most precise electrochemical sensors in the world
- 40% longer service life compared to other sensors on the market
- Loud alarm signaling
- Test / Reset button - for checking and operating the device
- Battery powered for protection also in the event of a power outage
- Possibility of wall mounting or placing the sensor on a flat surface
- Signaling of incorrect work and the end of the period of operation
- Low voltage indication
- Additional LED diode signaling incorrect operation of the device and the end of the service life
- Function informing about the activation of the alarm in the last 14 days
- Simple assembly and operation
- Certification for use in homes and caravans, motorhomes and boats
- Small dimensions, low weight, aesthetic and durable housing
- Very low cost of operation
- Construction mark B
- National Certificate of Constancy of Performance confirming compliance with the Polish standard PN-EN 50291-1:2018+AC:2021
- BSI certificate confirming compliance with the BS EN 50291-1:2018
- BSI certificate confirming compliance with BS EN 50291-2:2019
- 10-year warranty
Product information | |
Sensor | Patented KIDDE electrochemical CO sensor |
Gases detected | Carbon monoxide - CO |
Alarm signaling | Optical - built-in red LED Acoustic - siren with the sound intensity of approx. 85 dB at a distance of 3 m, 3.0 ~ 3.5 KHz |
Signaling the end of the service life | Optical – the yellow LED flashes twice every 60 seconds Acoustic – double, short beep every 60 seconds |
Signaling of incorrect operation | A short beep every 30 seconds and a yellow LED flashing every 30 seconds or a continuous beep |
Memory of alarm activation | A red LED flashes every 60 seconds when the device has detected a CO concentration of 100ppm or more in the last 14 days |
Test/Reset Button | For the control and operation of the device After pressing the button, the device performs a control test To clear the alarm activation signaling stored in the device memory It allows you to reset the alarm when it is activated |
Peak concentration button | No |
Sensor durability | 10 years |
Display | No |
Mounting | On a wall, ceiling or as a free-standing unit, on a flat surface |
Housing | Made of ABS plastic |
Additional features | Simulation test – allows you to test the device with CO test gas available on the market |
Additionally included | Batteries, mounting bracket, mounting pins, user manual |
Power | |
Power source | 2 x 1.5V AA alkaline batteries (included) |
Battery discharge indication | Short beep and yellow LED flashes every 60 seconds |
Working and storage conditions | |
Working conditions | Temperature: -10 ~ 45°C Humidity: up to 90% RH, non-condensing |
Storage conditions | Temperature: -20 ~ 60°C Humidity: 5 ~ 95% RH, non-condensing |
Quality and safety | |
Certificates and approvals | Construction mark B National Certificate of Constancy of Performance confirming compliance with the Polish standard PN-EN 50291-1:2018+AC:2021 BS EN 50291-1: 2018 Certification body BSI KM 738897 BS EN 50291-2: 2019: Certification body BSI KM 738897 CE mark |
Warranty | 10 years |