Carbon monoxide & smoke alarm 10SCO

  • Previous

    Carbon monoxide alarm with display K10LLDCO
  • Next

    Smoke & carbon monoxide alarm K10SCO
Carbon monoxide & smoke alarm 10SCO
0.00 zł
Ex Tax: 0.00 zł
  • Stock: Out of Stock
  • Model: KID-10SCO
  • EAN: 0047871104062
  • Weight: 360g
  • Dimensions: 145mm x 145mm x 45mm

10SCO is used to protect rooms against fire and carbon monoxide. The device has two independent sensors placed in one housing.

Smoke sensor monitors the air for the presence of products formed during combustion or smoldering objects. Carbon monoxide sensor is used to monitor rooms for carbon monoxide (CO).

If a fire is detected and / or the permissible concentration of carbon monoxide is exceeded, an acoustic alarm with a strength of 85dB is triggered, an optical alarm (red LED) and a voice message (in English) is emitted informing about the type of detected threat. The built-in automatic efficiency control system monitors, among others state of sensors, batteries and internal circuits. When a fault is detected, the signaling appropriate to the fault is activated.

Test / Reset button allows the device to be checked and operated. The device's memory stores information about the detection of CO concentration exceeding 100 PPM. Thanks to this, the user can check if there was any emission of carbon monoxide during his absence in the room.

10SCO can be ceiling or wall mounted. Battery power allows the detector to be installed in the most optimal place and provides protection also in the event of a power failure in the network. 10 years after the activation of the power supply, device will inform about the need to replace the device.

10SCO is a device that meets both the PN-EN14604: 2006P (EN14604: 2005) standard for home smoke detectors and the PN-EN50291-1: 2010 / A1: 2013-05 standard for home carbon monoxide detectors. Fulfilling the above-mentioned standards has been confirmed by an independent, notified testing body, BSI.

Recommended installation locations: near the kitchen, in the living room, living room, dining room, bedroom, basement, in the attic, and places where electrical appliances that may be a source of fire and appliances that are a potential source of carbon monoxide, e.g. fireplace, electric or gas heaters rooms, etc.


  • Electrochemical technology - one of the most precise electrochemical sensors in the world
  • High-quality optical sensor ensuring long-term and stable operation
  • At least 40% longer service life compared to most sensors available on the market
  • Loud alarm signaling
  • Voice prompts distinguishing the detected threat
  • Test / Reset button for checking and operating the device
  • Hush® feature to mute the audible alarm signal
  • Battery powered for protection also in the event of a power failure in the network
  • Can be mounted on the ceiling or wall
  • Safety mechanism against accidental disassembly of the sensor and battery
  • Signaling of discharged batteries
  • Signaling of incorrect operation and end of the period of operation
  • Simple assembly and operation
  • Compliance with PN-EN14604: 2006P (EN14604: 2005)
  • Compliance with the PN-EN50291-1: 2010 / A1: 2013-05 standard
  • 10-year warranty
Product information
Sensor Optical for fire hazard detection
KIDDE electrochemical CO sensor for the detection of carbon monoxide
Alarm signaling Exceeding the permissible CO concentration - acoustic 85dB, optical (red LED) and voice message "Warning! Carbon Monoxide"
Fire detection - acoustic 85dB, optical (red LED) and "Fire! Fire!" Voice message
Save concentrations above 100 PPM in the memory - green LED blinking every 16 seconds
Signaling the end of the service life Yes - a short beep every 30 seconds
Signaling of incorrect operation Short beep and flashing every 30 seconds. red LED
Test/Reset Button For controlling and operating the device and resetting alarm signals
Sensor durability 10 years
Mounting Wall or ceiling mounted
Housing Made of ABS plastic
Additionally included Battery, mounting bracket, mounting pins, user manual
Power source 9V alkaline battery (included)
Battery discharge indication Short beep and flashing every 30 seconds. red LED, voice announcement "Low Battery"
Working and storage conditions
Working conditions Temperature: 0 ~ 40°C
Humidity: up to 90% RH, non-condensing
Storage conditions Temperature: -10 ~ 60°C
Humidity: up to 90% RH, non-condensing
Quality and safety
Certificates and approvals PN-EN50291-1:2010/A1:2013-05, BSI certification body
PN-EN14604:2006P (EN14604:2005), BSI certification body
CE 0086-CPD-535595 14
Warranty 10 years
Test gas Reinoldmax with a volume of 220 ml dedicated to checking smoke detectors.Testing is done using a unique aerosol composition designed to safely simulate smoke particles. It models a variety of real fire signs so you can be sure your smoke detectors will respond instantly to any type of ..
55.00 zł
Ex Tax:44.72 zł
Gas test PurCheck® 30S designed for checking optical and ionizing smoke detectors.Ensure full compliance of tests carried out for detectors manufactured in accordance with UL217, 268 and ULC531; 527 (and equivalent standards). It doesn't corrode plastic components, doesn't leave stain..
98.00 zł
Ex Tax:79.67 zł
Kit designed for testing carbon monoxide detectors and tobacco smoke detectors. It consists of a test gas can, capillary tube and a string bag.The kit enables a simple and quick check of the sensors' response to test gas. It does not cause corrosion of plastic elements, does not leave stains and doe..
28.00 zł 39.00 zł
Ex Tax:22.76 zł

Write a review

Reviews policy.
Please login or register to review
The website uses cookies to provide services in accordance with the Privacy Policy. You can define the conditions for storing or accessing cookies in your browser. You can find out more about cookies in the Cookies tab.