- Stock: In Stock
- Model: KID-K10LLDCO
- EAN: 0047871313440
- Weight: 138g
- Dimensions: 119mm x 72mm x 39mm
Available Options
Carbon monoxide detector with display model K10LLDCO is equipped with a Kidde electrochemical sensor, guaranteeing 10 years of operation. Powered by a built-in battery that does not require replacement for the lifetime of the device. This solution allows the detector to be mounted in an optimal place in the room and provides protection also in the event of a power failure in the network.
The built-in LCD display shows the concentration level of carbon monoxide in the range from 0 to 999 PPM. CO concentration measurements are performed every second. Exceeding the permissible CO level is signaled optically (red LED) and acoustically (loud, pulsating sound alarm with a strength of 85dB).
The sensor has a test / reset button that allows you to check the device's operation and turn off the alarm signaling, as well as a button, when pressed, which displays the highest detected CO level stored in the sensor's memory. The sensor has the function of informing about the activation of the alarm in the last 14 days. Thanks to this, the user can make sure that there is no emission of carbon monoxide during his absence in the room.
The efficiency control system monitors on an ongoing basis, among others: the sensor, internal circuits and the state of the battery. In the event of a malfunction or low battery level, the yellow LED blinks, the LCD panel displays the corresponding graphic information and an audible warning sounds. In addition, the sensor is equipped with a simulation test function that allows you to quickly check the correct response of the sensor to the CO test gas.
Thanks to a specially designed housing, in addition to wall mounting, the sensor can also be placed on a flat surface, e.g. on a bedside table near the bed. It has a blockade that prevents disassembly of the device installed on the wall. After 10 years from the activation of the power supply, the sensor will remind you to replace the device.
K10LLDCO is marked with the construction mark B confirming compliance with the requirements of the Polish standard PN-EN 50291-1: 2018+AC:2021 for home carbon monoxide detectors. The research was carried out by the Scientific and Research Center for Fire Protection - National Research Institute (CNBOP-PIB). In addition, it has a BSI certificate confirming compliance with the requirements of BS EN 50291-1: 2018 issued by the British Standards Institution.
ADVANTAGES
- Electrochemical technology - one of the most precise electrochemical sensors in the world
- 40% longer service life compared to other devices on the market
- LCD display with a maximum indication of 999 PPM
- 40% longer service life compared to other sensors on the market
- Built-in battery - does not require replacement throughout the life of the sensor
- Loud alarm signaling
- Test / Reset button - for checking and operating the device
- Peak Concentration Button - for reading the highest detected CO concentration stored in the memory
- Integrated power supply for protection also in the event of power failure
- Possibility of mounting on a wall or placing the sensor on a flat surface
- A blockade that prevents removal of the sensor installed on the wall by children or bystanders
- Function informing about the activation of the alarm in the last 14 days
- Signaling of incorrect work and the end of the period of operation
- Low voltage indication
- Additional LED diode signaling incorrect operation of the device and the end of the service life
- Simple assembly and operation
- Small dimensions, low weight, aesthetic and durable housing
- Very low cost of ownership - no battery replacement required
- Construction mark B
- National Certificate of Constancy of Performance confirming compliance with the Polish standard PN-EN 50291-1:2018+AC:2021
- BSI certificate confirming compliance with the BS EN 50291-1: 2018 standard
- 10-year warranty including built-in battery
Product information | |
Sensor | Patented KIDDE electrochemical CO sensor |
Gases detected | Carbon monoxide - CO |
Alarm signaling | Optical - built-in red LED, device displays the CO concentration in the range 0 ~ 999 PPM Acoustic - siren with the sound intensity of approx. 85 dB at a distance of 3 m, 3.0 ~ 3.5 KHz |
Signaling the end of the service life | Optical – the yellow LED flashes twice every 60 seconds, "End" is displayed on the screen Acoustic – double, short beep every 60 seconds |
Signaling of incorrect operation | A short beep every 30 seconds and a yellow LED flashing every 30 seconds or a continuous beep, "Err" is displayed on the screen |
Memory of alarm activation | A red LED flashes every 60 seconds when the device has detected a CO concentration of 100ppm or more in the last 14 days |
Test/Reset Button | For the control and operation of the device After pressing the button, the device performs a control test To clear the alarm activation signaling stored in the device memory It allows you to reset the alarm when it is activated |
Peak concentration button | After pressing the button, the highest detected concentration of CO stored in the sensor's memory is displayed in the range 11 ~ 999 PPM |
Sensor durability | 10 years |
Display | LCD panel – indications in the range of 0 ~ 999 PPM |
Mounting | On a wall, ceiling or as a free-standing unit, on a flat surface |
Housing | Made of ABS plastic |
Additional features | Simulation test – allows you to test the device with CO test gas available on the market |
Additionally included | Mounting bracket, mounting pins, user manual |
Power | |
Power source | Built-in 3V DC lithium battery - does not require replacement during the lifetime of the device |
Battery discharge indication | Short beep and yellow LED flashes every 60 seconds, "Lb" is displayed on the screen |
Working and storage conditions | |
Working conditions | Temperature: -10 ~ 45°C Humidity: up to 90% RH, non-condensing |
Storage conditions | Temperature: -20 ~ 60°C Humidity: 5 ~ 95% RH, non-condensing |
Quality and safety | |
Certificates and approvals | Construction mark B National Certificate of Constancy of Performance confirming compliance with the Polish standard PN-EN 50291-1:2018+AC:2021 BS EN 50291-1: 2018 Certification body BSI KM 738897 CE mark |
Warranty | 10 years for device and battery |